Have you ever wanted to make a blanket with pictures? Now, with your sublimation printer, you can! Today I’m going to teach you how to make sublimation photo blankets using a sublimation blanket blank and photos printed from your sublimation printer.
If you’re new to sublimation don’t worry, I have a beginner’s guide just for you!
Make A Blanket With Pictures Video Tutorial
You can watch me make a blanket with pictures from start to finish by clicking play on the video below!
Can’t watch the video or missed some of the steps? You can also follow along below.
How To Make A Blanket With Pictures
I found a sublimation photo panel blanket that is perfect for making a photo blanket even if you have a small sublimation printer. My blanket uses 8.5″ x 11″ sized sublimation prints. You can use a standard sublimation printer and sublimate each panel separately ending with a large sublimation photo blanket.
Supplies Needed To Make A Blanket With Pictures
- Sublimation Photo Blanket
- Sublimation Printer
- Sublimation Ink
- Sublimation Paper
- Autopress (NOTE: Any heat press will work but you would want it to be large enough to cover one panel if possible.)
- Heat Resistant Tape
- Lint Roller
- Artesprix Protective Paper use code CCC10 for 10% off
- Heat Resistant Gloves
- Paper Cutter
- EasyPress Mini
- Large Black Mat
- Tape Dispenser
Other Blanket Options For Sublimation
For today’s project, I’m going to show you how to sublimate this specific panel blanket. If you want to sublimate other blankets, you can. I would use a blanket that is 100% polyester. If you’re looking for a blanket that looks different or maybe doesn’t have as many panels, you can use your sublimation printer to do that as well.
I’ve used Infusible Ink to make a sublimation blanket before adding a monogram to the corner. It’s another fun option if you don’t have a sublimation printer and you can see how to do that here.
What Is A Sublimation Print?
A sublimation print is an image printed on sublimation paper with sublimation ink from a sublimation printer. Because of my sublimation blanket blanks, I printed my images full-sized.
Don’t trim your images just yet, we’ll talk about what size to trim them to shortly.
Step 1: Measure Your Blanket
My blanket itself is pretty large. You can see a portion of it in the photo below. The white areas are where we will be sublimating our photos. We need to measure each white rectangle. I can’t stress enough not to trust the measurements that come with the blanket or with the listing.
Lay the blanket flat and measure in a few spots across the white area.
What Size Should I Make My Prints?
Once we have the measurement of our sublimation area, we can prepare our sublimation print. Because the outside edge of the sublimation area is black I want to make my prints slightly oversized. I am setting mine to 1/8″ larger on all sides.
Even though the outside edge is black, getting sublimation on it could still result in a line showing. Due to this, I don’t want to get too much sublimation on the black portion.
If your goal is to prevent any sublimation from the black, you could either cut your prints to the exact size as the white area or take long strips of heat-resistant tape and line the edge of your white areas. Sublimation wouldn’t get on the tape.
I don’t want to use that much tape and I don’t want my print to end up being too small so I’m going to add my print just a little oversized. I’ll show you a close-up of the finished product so you can see how it looks.
Bottom line: Measure the actual blanket! My blanket measurements were not the same as the Amazon listing.
Step 2: Trim Prints To Fit Sublimation Blanket
I printed all of my images the full size my printer would allow on an 8.5″ x 11″ sheet of paper. I am making my finished print 10.5″ long by 8″ wide. To do this, I’m using my paper trimmer and I am trimming one side right at the end of the print.
Let’s start with the long side. Trim one end right at the end of the print and then turn it around and line it up on the 10.5″ mark and trim off the excess.
Now we’re going to trim one side of the short side right along the edge of the print and then turn it and trim the other side at 8″. Now I have a perfectly sized print for my sublimation areas. Repeat this process for each photo.
Step 3: Press Sublimation Prints
Because of how this blanket is set up, we’re going to pre-press each panel to make sure all of the moisture is out of it.
I am using my Cricut Autopress because the mat that comes with the Autopress is so cushioned I am removing it and using a firmer heat-resistant mat. You could use a heat-resistant mat, Nomex pad, or, if you’re using a different heat press, you’re probably fine with the mat it comes with.
If you’re using an EasyPress, I would not use the EasyPress Mat, use something a bit firmer for this project.
After you pre-press for about 10 seconds, lint roll the area really well to remove any lint, dust, hair, etc.
Now we’re going to add our sublimation print. Take your time to line the print up very carefully. If you trimmed your photo to be slightly larger than your sublimation area, make sure it’s slightly onto the black area.
Use heat-resistant tape to hold the print into place.
I am pressing one panel at a time because they fit within the heated area of my Autopress. Once the sublimation print is in place, add protective paper over the top and then press.
My blanket instructions recommend 360 degrees for 60 seconds. Make sure you check wherever you purchased your blanket for the correct settings. After the press is complete, remove your sublimation print and then move the entire blanket to the next panel.
How To Protect Your Sublimated Areas
You need to make sure the panels you’ve already sublimated are hanging outside of the press area of your heat source. Because I’m using the Autopress I can slide the blanket right through the back.
Follow the correct process for each sublimation print. Pre-press, lint roll, apply print, and cover with protective paper. Press at the correct temperature for the full time and continue this way for each panel.
Pro tip – Map out where you want each sublimation print and move from one side to the other.
I started in the upper left corner and moved across the top row and then down one row. If you move around and leave the middle portion for last, you may not be able to press that portion without applying heat to a previously sublimated area.
Pressing Tips and Tricks
Here are a few tips and tricks to consider when making sublimation blankets like this one:
- I picked a blanket where each of the panels fit in the heat press I have. I would recommend that for the best results. Press one sublimation print at a time.
- Check and double-check that your images are orientated correctly. Applying a print upside down will ruin the entire blanket.
- Making a larger blanket like this is easy as long as you pick the right size for your printer and heat press setup.
- I found about eight pieces of tape per panel helped to hold the image in place so I didn’t have any white areas along the edges.
How To Prevent White Edges Around The Photo
To prevent having white edges around the photo I lined up one corner of my print, taped it down, and then proceeded to each of the four corners.
Be aware that the fabric will stretch as it hangs off the heat press. This can stretch out the sublimation areas. I used my fingers to pull them back into shape while taping them down.
You have to do this with every single panel. These blankets do take a while to make so be prepared for that. I found I got better at locating my designs the more I did. By the end of the blanket, I was pretty good at locating the design just right.
This blanket comes in a set of two, so you could definitely do one as your test or your experiment and then do the other.
How To Remove Sublimation Tape Marks
After I finished sublimating this blanket I threw it in the washer and dryer to see if the tape marks would come out. You can see them less after washing and drying but you can still see them in the photo below.
While I was making my blanket I tried two different brands of tape. After applying heat, the tape was pulling some of the black on the blanket. It may just be because I purchased an inexpensive blanket from Amazon but I wanted you to be aware of that happening.
Use Your EasyPress Mini To Remove Tape Marks
I like to use my EasyPress Mini and run it over the tape marks. I do this with almost all of my fabric sublimation projects. As long as you don’t leave the heat in one place for too long, it shouldn’t affect the sublimation.
Run the Mini over each of those areas and you should see the tape marks almost disappear.
Tips For Applying Sublimation Photos
Now that we have the sublimation photo blanket finished let’s look at the different sublimation panels. Some of them I did really, really well. The size I made mine, as I said, was about an eighth inch more than the size of the panel.
Once you press the blanket, the panels get a little bit bigger. So they ended up being basically exactly the size of my panels. Some of them ended up being a little bit off resulting in a white line along the edge of the photo.
I did notice making them oversized resulted in the print leaving a line on the black portion of the blanket. It’s hard to see in the photos but I wouldn’t recommend making them too large. If you make them too large, you get a black line. If you make them too small or don’t locate them correctly you kind of get a white line.
I got better at it as I went along. So I do think it’s a practice thing. Practice makes perfect. Be ready for some trial and error and give yourself some grace. I have made hundreds of sublimation projects and even I didn’t get it perfect on my first try. The good news is this blanket came in a set of 2 so I had the opportunity to practice.
Final Thoughts On How To Make A Blanket With Pictures
You can get sublimation photo blankets in tons of different sizes. I do think the quality will likely be a “you get what you pay for” situation. My blanket quality isn’t horrible. I haven’t used any other brands so I cannot say if any of those would be any better.
With mine, the sublimation areas seemed to be different sizes and the tape seemed to pull some of the black out when the heat was applied. I do think it’s a great brand for learning your way around. It’s inexpensive and comes in a two-pack.
Once you’ve learned your way around these blankets and what works best for your setup, you could move on to more expensive options which was my goal with this project.
Now all that’s left is to give this one as a gift or keep it for yourself. If you love this idea but don’t know what you’re doing when it comes to sublimation I have a course for that. Sublimation Prep is open for enrollees right now! Check out the course and all it covers here!
FAQs About How To Make A Blanket With Pictures
If you have questions about how to make a blanket with pictures, I have answers for you! Please leave your question for me in the comments if you don’t see it already answered below.
Do You Mirror Your Pictures Before Printing As In Other Sublimation?
Yes, you do.
Do You Have An Issue With The Picture Being A Tad Too Big And Being Visible In The Black Part?
Yep, you can definitely see it either way. I just made mine REALLY close to the square size and took a ton of time lining it up and taping it down.
If You Add Your Own Black Border Just A Tiny Bit Bigger To Overlap, Would That Work? Or Would There Still Be A Faint Border In The Black Area?
You would see black in the black border.
I Do Not Own An Autopress, Would The EasyPress Work As Well?
Sure! EasyPress would work for this or another heat press! I just used my AutoPress because it was a bit easier to squeeze all of the blanket inside.
Do You Think It Would Help To Wash The Blanket First?
Hmmm…I don’t think so but it might get some of that black out?
What If The Blanket Is White On The Back, Will The Sublimation Go Through To The Back?
If it is sold as a sublimation blank, it shouldn’t.
How Does The Blanket Look On The Back?
It was fine on the back!
What Kind Of Cutter Are You Using?
It is a rotary paper trimmer. This brand has been discontinued.
5 More Sublimation Crafts
Did you love learning about how to make a blanket with pictures and are looking for other sublimation crafts? Then check out the ideas below!
- 5 Photo Sublimation Gift Ideas with Instructions!
- Pet Sublimation Blanks for Dogs and Cats
- How to Make Custom Sublimation Puzzles
- Sublimation on Canvas: Gallery Wraps & Photo Canvases
- Custom Sublimation Wallets: Your Ultimate DIY Guide
